Description
Truncator – Precise and Easy to Use
The Truncator is a module designed for the Ultima-TIG series. It eliminates the risk of melting the ground tip of the electrode.
TZ-75523010 – Truncator for Ultima-TIG / -CUT
The Truncator module was developed in order to avoid the 2 situations that really stress your Tungsten electrode, when TIG welding. Those situations are high amperage welding and AC welding e.g., aluminium. In both situations you can diminish the risk of melting off the tip by truncating your Tungsten electrode.
Highlights
- Precise truncation of ground Tungsten electrodes
- Various positions on the grinding disc
- Eliminates the risk of melting off the tip into the weld pool, causing contamination
- Ideal for AC welding where it reduces the risk of obtaining an excessive ball at the tip
Serial number
TZ-75523010
TZ-75523010 Configurator
Similar Products
TIGZONE WL20 series
2% LANTHANATED (BLUE) EWLa-2/WL20 Principal Oxide: 1.8–2.2% Lanthanum Oxide Non-Radioactive. Best general purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts…
MZ-NG.61150012
The Narrow-Gap Welding System “NG” is typically designed to fit on torch SB400W/500W or identical. It is designed for groove depths 60mm up to 150mm. Special lengths as well as systems for other brands or types of torches are possible at any time. Equipped with a Protection Cap made out…
NS-5818C
Centerfire – A Clear Cut Difference All consumables are not created equal. From materials to cost and design quality, each brand on the market varies and so does their performance. In fact, comparing consumable quality and costs to the amount of labor for changeover and rework often reveals surprising results…