Description
The hard-wearing protective shield for TIG welding: ERGO TIG protect was developed analogously to the anatomical movement of the fingers. The thumb is sewn separately to the glove. Reinforced palms give the glove exceptional robustness.
Rhino Protection – TIG Glove ERGO TIG protect
- Full-Grain soft goat leather for maximum dexterity
- Special kevlar stitching less visible stitches optimize the safety
- Keystone thumb ergonomic design, stitched separately to the glove
- Designed according to finger bones movement
- Elasticated 1-Piece grain leather back for perfect fit
- High quality Young Cow shoulder split leather cuff maximize arm movement
- New CE 2020 Standard EN ISO 21420
- EN 12477 TYPE B
- EN 407:2020 ( 4 1 X X 4 X )
- EN 388:2016 ( 3 2 2 3 X )
- Available sizes 9 – 10 – 11
Serial number
Rhino Protection - TIG Glove ERGO TIG protect
Rhino Protection - TIG Glove ERGO TIG protect Configurator
Similar Products
TIGZONE WP series
PURE (GREEN) EWP/WP Principal Oxide: None NON-RADIOACTIVE. Good for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys in low to medium amperage applications using transformer based constant current power sources only. Balls easy, tends to spit at higher amperages. Used for non-critical welds only.
CK9PV
Brennerkörper Gas 125A 180º Rg V
MZ-NG.611208
The Narrow-Gap Welding System “NG” is typically designed to fit on torch SB400W/500W or identical. It is designed for groove depths 60mm up to 150mm. Special lengths as well as systems for other brands or types of torches are possible at any time. Equipped with a Protection Cap made out…
