T0207GC2 – Wolframelektrode 0.5mmx175mm, grau, 2% Ceriated

The Truncator module was developed in order to avoid the 2 situations that really stress your Tungsten electrode, when TIG welding. Those situations are high amperage welding and AC welding e.g., aluminium. In both situations you can diminish the risk of melting off the tip by truncating your Tungsten electrode.…

The Narrow-Gap Welding System “NG” is typically designed to fit on torch SB400W/500W or identical. It is designed for groove depths 60mm up to 150mm. Special lengths as well as systems for other brands or types of torches are possible at any time. Equipped with a Protection Cap made out…

1.0% LANTHANATED (BLACK) EWLa-1.0/WL10 Principal Oxide: 0.8–1.2% Lanthanum Oxide Non-Radioactive. Best for use in Direct Current (D/C). Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no spitting.